PROTECTION BOX P2X100
APPLICATIONS:
Used in low voltage electricity distribution networks, they allow for sectioning and facilitate interruption of the supply of electricity to facilities.
MATERIALS:
Made of polyester reinforced with grey self-extinguishing fibreglass, RAL 7035.
End caps in plastified PVC gray RAL 7035.
APPLICABLE STANDARDS:
EN 61439-2
DMA C62-810/N
CHARACTERISTICS:
IP45 IK10
Integrated or surface assembly.
Prepared to EDP* lock with cylindrical cannon type RONIS (06P2x100).
Inputs and outputs with adjustable conical caps.
Frequency: 50/60Hz
Nominal voltage: 400V, 50Hz
Transitory overvoltage (Uimp): 6kV
Overvoltage category: CAT IV
Insulation voltage: 600V
Nominal current: 100A
Short-circuit current: 25kA
Neutral regime: TN
Diversity factor (RDF): 1
CEM environment: A
Pollution level: 3
Insulation category: Category II
Internal separation method: Method 1
Connection type: FF
Fixed installation outside up to 2000m altitude.
*EDP-Energias de Portugal
ASSEMBLY INSTRUCTIONS:
For integrated or surface assembly, after construction of assembly surfaces.
06P2X100 This product was developed for the introduction of up to 3x200 A building power supply cables.
Protection and/or cut-off systems may be installed inside.
The maximum weight of equipment in the interior must not exceed 250 kg/m2 and no heavy item may be assembled on the door.